• Home
  • /Archive by category ' Projects '

Archive For: Projects

ApolloVR Files

The Apollo 1260 Voltage Regulator is needed when an upgrade is made on a Apollo 1240 from  68040 to 68060 CPU. This is because the 68060 used VCC 3.3V instead of VCC 5V. I based the design around the LM1085 voltage regulator that I find to be very good, but size is a bit bigger ... Read More
 

BPPC Heatsink Files

Over the past months I have been asked several times regarding the Blizzard PPC Heatsink I made. I have decided to release the files, but they have to be modified, else the heatsink will not fit in the A1200 desktop case. The modification that needs to be done is simply remove the following cooling stubs. ... Read More
 

INT7 Files

I have decided to share all my own creations for Amiga and a first step is to release the INT7 (Level 7) PLCC adapter for Amiga 600/1200/4000D(T). This is perfect when using for example a custom Amiga Kickstart ROM with HRTMon in it, or when using for example AsmOne/Pro with INT7 interrupt enabled. Personally I ... Read More
 

Z221 / Z222 Fix

For those who repair and/or change electrolytic capacitors on Amigas has probably sometime bumped into bad Z221 and Z222 which is the band pass filter and delay line. These components are cruical for the RF and Composite video output. When they are bad you can experience the following error. Sadly these components are more or ... Read More
 

A1200 CN1A Cable

So I have been absent for quite a while now, but I promise that it has been for a good reason. Been busy with work, Amiga development (both hardware and coding) and all other things you not sitting at a computer. Recently I have done a few re-caps and Repair of spare A1200 boards and ... Read More
 

INT7 Adapter

A new year and possibly many new projects that will be done and also new ideas that will take place. Last year was rather hysteric and this blog one one of many things that I had to put on my “to-do-list” (sadly). Anyway, I atill managed to finish many projects and only a few of ... Read More
 

Apollo VR 1260/4060

A while ago, a friend of mine asked me if I could help him to draw a Voltage Regulator for the ACT Electronic Apollo 1260/4060 cards. Unless you need to replace your current Voltage Regulator it is also used when you upgrade a Apollo card from 040 to 060. This is is because of that 060 ... Read More
 

A.M.A.S Sampler (cables)

I recently purchased a A.M.A.S Sampler/Midi from a fellow Amiga friend on Facebook. The overall condition of it was very good, but the parallel and serial cable was loose inside the case. And of course they both fell out at the same time when I opened it up so I can no chance to see ... Read More
 

Retr0br1ght Box

So there is this thing with old plastic gears and how it get yellowed by time. You don’t need to be a smoker, since it will occur anyway due to a fire-retardand substance called bromine combined with ultraviolet (UV) light. The solution to this is to have a solution of hydrogen peroxide and expose it to ... Read More
 

CS/CVPPC 80mm Fan

The Amiga 4000T has quite a lot more room inside that a normal Amiga 4000D has. So why don’t take advantage of it and make a high effective solution for CVPPC / CSPPC cooling? After I had been thinking about this for a while started to draw a simple sketch where I made a fan-holder ... Read More
 

A4000T Fix

Finally I had time to write down the things I did to fix my new Escom Amiga 4000T. It was quite a while ago since I bought it but time hasn’t been to put it into a blog. Anyway, the overall shape of the A4000T was quite good. The case was a bit scratchy and ... Read More
 

R.A.M.S CIA Adapter

Evolution also have effect on the R.A.M.S (Ratte Auto Monitor Switch) and this time the CIA-Adapter for Amiga 1200(T)/4000(T) had some improvements. By adding a smaller PCB instead of cutting legs and solder to wires to the GND, VCC and CTS pins, the installation is easier but also less chance of breaking the PLCC adapter. ... Read More